Manual steinberg cubase 5 free download

Looking for:

Cubase Essential 5 Updates and Downloads | Steinberg.Operation Manual

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Manual steinberg cubase 5 free download Media Technologies GmbH. These professional Sound and Loop Sets recorded by different artists and creative minds will bring a new dimension to your recordings in any musical genre. Sequel Content Sets turn Sequel and Cubase into a fully fledged music factory for your favorite music style!

Steinberg offers a range of manual steinberg cubase 5 free download at special education pricing for facilities, educators and students. March 29th, This patch updates an installed Cubase 5. Steinbrg note: To update from a Cubase 5 version older than Cubase 5. This patch updates an installed Cubase 5 installation 5. Afterwards the current Cubase 5.

Please note that you might need to insert the original Читать полностью 5 installation DVD during the downllad process! The ISO image here contains all data necessary for manual steinberg cubase 5 free download complete installation. A valid license is required to run the software. Cubase 5. New in Cubase 5. In case you consider setting up a new system or upgrading an existing one, we’ve gathered many useful tips and recommendations on how to configure your Digital Audio Ffree DAW.

As with most software, the детальнее на этой странице value is reflected in the license to use this product. Fred up on what measures you can take in case of a defective or lost USB-eLicenser.

Our YouTube channel not only offers a selection of product presentation videos but also several very helpful and informative video tutorials. Home Support Cubase. Shop Software Host Applications. Find your local Steinberg dealer.

Audio Interfaces. Try Steinberg Software now for 30 days. Education Steinberg offers a range of products at special education pricing for facilities, educators and students.

Host Applications. Nuendo SyncStation. Expansions for VST Instruments. Support Downloads. Go to top. Configuring a DAW In case you consider setting up a new system or upgrading an existing one, we’ve gathered many useful tips and recommendations on mabual to configure your Digital Audio Workstation DAW.

Read more. Steinberg Zero Downtime As with most software, the retail value is reflected in the license to use this product. Video tutorials Our YouTube downlad not manual steinberg cubase 5 free download offers a selection of product presentation ,anual but also several very helpful and informative video tutorials.

Company Press Careers Distributors. Developers eLicenser. Facebook YouTube Twitter instagram Soundcloud.

 
 

Steinberg cubase 5 operation manual by ziyap41 – Issuu

 

These professional Sound and Loop Sets recorded by different artists and creative minds will bring a new dimension to your recordings in any musical genre. Sequel Content Sets turn Sequel and Cubase into a fully fledged music factory for your favorite music style!

Steinberg offers a range of products at special education pricing for facilities, educators and students. Updates, installer, operation manuals and other downloads for older software and hardware, for which we cannot provide support anymore.

In case you consider setting up a new system or upgrading an existing one, we’ve gathered many useful tips and recommendations on how to configure your Digital Audio Workstation DAW. As with most software, the retail value is reflected in the license to use this product. Read up on what measures you can take in case of a defective or lost USB-eLicenser. Range Editing Editing in the Project window is not restricted to handling whole events and parts.

Creating a Selection Range. Editing Selection Ranges You can edit selection ranges, that is, adjust their size, move or duplicate them, split them, etc. Playback and Transport Cubase offers multiple methods and functions to control playback and transport. Transport Panel The Transport panel contains the main transport functions as well as many other options related to playback and recording.

Transport Menu The Transport menu contains several transport functions as well as many other options related to playback and recording. Transport Bar The Transport Bar contains all transport functions in an integrated and fixed zone of the Project window. Transport Pop-Up Window The Transport pop-up window allows you to access specific transport commands if the Transport panel, the Transport Bar, and theTransport Controls in the Project window toolbar are closed or hidden.

Time Display Window The Time Display window allows you to view the current time position in a separate window. You can adjust its size and specify the time format that you want to display. Left and Right Locators The left and right locators are a pair of markers that you can use as reference positions in the Project window and in the editors.

Setting the Project Cursor You can set the project cursor to the position where you click, or to markers or other predefined positions. Auto-Scroll Settings Menu Auto-Scroll allows you to keep the project cursor visible in the window during playback. Time Formats You can set up different time formats. Punch In and Punch Out The punch in and the punch out points are a pair of markers that you can use for punch in and punch out of recordings.

The punch in position determines the record start position and the punch out position determines the record stop position. Metronome Click You can use the metronome click as a timing reference for playing along and recording. The two parameters that govern the timing of the metronome are project tempo and the time signature that you can set up on the Transport panel.

Chase Chase is a function that makes sure your MIDI instruments sound as they should when you locate to a new position and start playback. This is accomplished by the program transmitting a number of MIDI messages to your instruments each time that you move to a new position in the project, making sure all MIDI devices are set up correctly with regard to program change, controller messages such as MIDI volume , etc.

This is useful if you have no external MIDI instrument at hand and you do not want to draw in notes with the Draw tool. Monitoring In Cubase, monitoring means listening to the input signal while preparing to record or while recording. Audio Recording Specifics Specific preparations and settings are required for audio recording. Remaining Record Time The Max.

Record Time display lets you see how much time you have left for recording. Lock Record The Lock Record function prevents you from accidentally deactivating record mode. Audio File Import You can import compressed and uncompressed audio files in a variety of different formats.

You can also import audio from audio CDs or extract the audio of video files. Quantizing is designed to correct errors, but you can also use it in a creative way. Quantize Functions The quantize functions are available in the Edit menu and in the Snap and Quantize sections of the Project window toolbar.

Quantizing Audio Event Starts You can quantize the audio event start positions. Quantizing Audio Event Lengths AudioWarp Quantizing You can quantize an audio event or an audio selection range by applying time stretch to the content of the audio event.

Quantizing Multiple Audio Tracks You can quantize multiple audio tracks at the same time. Depending on what method you choose, different parameters are shown. Fades, Crossfades, and Envelopes Fades allow you to gradually increase or decrease the volume at the start or end of audio events or audio clips, and to create smooth transitions.

Event-Based Fades You can create event-based fade ins and fade outs. These are calculated in real time when you play back audio events. You can create different fade curves for several events, even if they refer to the same audio clip. These fades are applied to the audio clip.

Events that refer to the same clip get the same fades. Crossfades Crossfades allow you to create smooth transitions for consecutive audio events on the same track. Crossfades are always event-based. Auto Fades and Crossfades Cubase features an Auto Fade function that can be set both globally and separately for each audio track. Event Envelopes Event envelopes are volume curves for audio events. They allow you to create volume changes within the event, not only at the start or end.

Arranger Track The arranger functions in Cubase allow you to work in a non-linear fashion. Using an arranger track allows you to specify how and when specific sections are played back, even in live performances. This way, you do not need to move, copy, and paste events in the Project window. Adding Arranger Events on the Arranger Track On the arranger track, you can add arranger events that define specific sections of the project. Arranger Editor The Arranger Editor allows you to set up arranger chains.

Jump Mode If you have set up an arranger track and play it back, you have live access to the playback order. This way, you can loop your arranger events with more flexibility regarding the length of the playback. Arranging Music to Video When you compose music for video, you can use arranger events to fill a specific video section with music. The following is an example on how you could do that.

Audio or MIDI events in your project use it as a reference. Transpose Track The transpose track allows you to transpose the entire project or sections of it. This function is useful if you want to create harmonic variations. Transpose on the Info Line In the Project window info line, you can change the transpose value for individual parts or events.

Excluding Individual Parts or Events from Global Transpose If you add global transposition, for example, by changing the root key or by creating transpose events, you can exclude specific events from being transposed. This is useful for drum and percussion loops or special effects FX loops.

Markers Markers are used to locate certain positions quickly. There are two types of markers: position markers and cycle markers.

Position Markers Position markers allow you to save a specific position. Cycle Markers By creating cycle markers you can save any number of left and right locator positions as start and end positions of a range and recall them by double-clicking on the corresponding marker. Markers Window In the Markers window, you can view and edit markers. The markers on the active marker track are displayed in the marker list in the order in which they occur in the project.

Marker Track A marker track is used for adding and editing markers. Importing and Exporting Markers Markers and marker tracks can be imported and exported.

MixConsole The MixConsole provides a common environment for producing mixes in stereo or surround. Furthermore, you can set up the input and output routing for multiple tracks or channels at the same time.

This is useful if you want to access the most important MixConsole functions from within a fixed zone of the Project window. The MixConsole in the lower zone of the Project window is a separate MixConsole that does not follow any visibility changes you perform in the MixConsole window. Adding Channels to the Control Room To be able to use the Control Room, you must add the channels that you need first.

Output Routing. However, it can be useful to create monitor channels that share device ports with each other as well as inputs and outputs. This can be helpful if you use the same speakers as a stereo pair and also as the left and right channels of a surround speaker configuration, for example.

Setting up a Cue Mix You can create a cue mix from the fader and pan levels that are used in the MixConsole and change them to meet the needs of the individual performers. Adjusting the Overall Cue Send Level You can adjust multiple send levels at the same time for the cue send mix, keeping the blend intact while lowering the overall volume. This is sometimes necessary, because the levels in the main mix are often optimized for the loudest possible signal level without clipping.

Metering Cubase provides a master meter and a loudness meter that can be shown in the right zone of the Project window and the MixConsole, or in a separate window in the Control Room. Audio Effects Cubase comes with a number of included effect plug-ins that you can use to process audio, group, instrument, and ReWire channels. Insert Effects and Send Effects You can apply effects to audio channels by using insert effects or send effects.

Insert Effects Insert effects can be inserted in the signal chain of an audio channel. This way, the whole channel signal passes through the effect. Send Effects Send effects are outside the signal path of an audio channel. The audio data that is to be processed must be sent to the effect. Side-chaining allows you to use the output of one track to control the action of an effect on another track. Dither Effects Dither effects allow you to control the noise that is produced by quantization errors that can occur when you mix down to a lower bit depth.

External Effects You can integrate external effect devices into the sequencer signal flow by setting up external FX busses. Effect Control Panel The effect control panel allows you to set up the parameters of the selected effect. The contents, design, and layout of the control panel depend on the selected effect. Effect Presets Effect presets store the parameter settings of an effect.

The included effects come with a number of presets that you can load, adjust, and save. System Component Information Window The System Component Information window lists all available MIDI plug-ins, audio-codec plug-ins, program plug-ins, project import-export plug-ins, and the virtual file system plug-ins.

Direct Offline Processing Direct Offline Processing allows you to instantly add plug-in effects and audio processes to the selected audio events, clips, or ranges, without destructing the original audio.

The window always shows the processing of the selected audio. Direct Offline Processing Window The Direct Offline Processing window allows you to add, modify, or delete audio processing instantly for one or multiple events, clips, or selection ranges in one window. Furthermore, you can undo any audio processing, at any point and in any order.

Time Stretch and Pitch Shift Algorithms In Cubase, time-stretching and pitch-shifting algorithms are used for offline processes, in the Sample Editor, or for the Flattening Realtime Processing function. Limitations Applying time stretching or pitch shifting to audio material can lead to a degradation in audio quality and to audible artifacts. The result depends on the source material, the particular stretch and pitch operations applied, and the selected audio algorithm preset.

Audio Functions Cubase offers particular functions for analyzing the audio in your project. You can split events and remove the silent parts from the project, or create regions corresponding to the non-silent sections. Spectrum Analyzer Window The Spectrum Analyzer window displays the audio spectrum of an event, clip, or selection range as a two-dimensional graph, with frequency range on the x-axis and level distribution on the y-axis.

Statistics Window The Statistics function analyzes the selected audio events, clips, or selection ranges. Sample Editor The Sample Editor provides an overview of the selected audio event. It allows you to view and edit audio by cutting and pasting, removing, or drawing audio data, and by processing audio. Editing is non-destructive so that you can undo modifications at any time. Sample Editor Toolbar The toolbar contains tools for selecting, editing, and playing back audio.

Info Line The info line shows information about the audio clip, such as the audio format and the selection range. Overview Line The overview line displays the whole clip, and indicates which part of the clip is shown in the waveform display. Sample Editor Inspector The Inspector shows controls and parameters that allow you to edit the audio event that is opened in the Sample Editor.

Ruler The ruler shows the timeline and display format of the project, the project tempo grid. Waveform Display The waveform display shows the waveform image of the edited audio clip. Range Editing In the Sample Editor you can edit selection ranges. This option is useful if you want to quickly edit or process a specific section in the audio waveform, or if you want to create a new event or clip. Regions List Regions are sections within an audio clip that allow you to mark important sections in the audio.

You can add and edit regions for the selected audio clip in the regions zone. Snap Point The snap point is a marker within an audio event that can be used as a reference position. Hitpoints Hitpoints mark musically relevant positions in audio files. Cubase can detect these positions and create hitpoints automatically by analyzing onsets and melodic changes of the audio. Calculating Hitpoints When you add an audio file to your project by recording or by importing, Cubase automatically detects hitpoints.

Locating to Hitpoints in the Project Window You can navigate through the hitpoints of an audio event in the Project window. Slices You can create slices from hitpoints, where each slice ideally represents an individual sound or beat of the audio. Creating a Groove Quantize Map You can use hitpoints to create a groove quantize map. Creating Markers You can create markers at hitpoint positions.

This allows you to snap to hitpoint positions. Creating Regions You can create regions at hitpoint positions. Steinberg offers a range of products at special education pricing for facilities, educators and students. March 29th, This patch updates an installed Cubase 5. Please note: To update from a Cubase 5 version older than Cubase 5. This patch updates an installed Cubase 5 installation 5. Afterwards the current Cubase 5. Please note that you might need to insert the original Cubase 5 installation DVD during the update process!

The ISO image here contains all data necessary for a complete installation. A valid license is required to run the software. Page By dragging files and dropping them on the track at the desired position. Select the Scrub tool. Note that the Play tool and the Scrub tool share the same tool button.

Click at the desired position and keep the mouse but- ton pressed. The project cursor is moved to the This can be helpful when rearranging your project, since it allows you to select whole sections on all tracks by selecting all tracks and moving the project cursor. It is also possible to select ranges, regardless of the event and track boundaries. This is done using the Range

 

Manual steinberg cubase 5 free download. Cubase 5 Instruction Manual PDF

 

You can easily download all the documents as PDF. E-mail address. Remember login. Login or create new account. Add to Favourites. Download as PDF. Overview View all the pages Comments. Page By dragging files and dropping them on the track at the desired position. Select the Scrub tool. Note that the Play tool and the Scrub tool share the same tool button. Click at the desired position and keep the mouse but- ton pressed. Input busses Most likely you need at least one stereo input bus assigned to an analog input pair.

This would let you record stereo material. If you want to be able to record in stereo from other analog input pairs as well, you add stereo input busses for these, too.

Although you can record mono tracks from one side of a ste- reo input, it may be a good idea to add a dedicated mono in- put bus. This could be assigned to an analog input to which you have connected a dedicated microphone pre-amp for ex- ample. Again, you can have several different mono busses. You probably want a dedicated stereo input bus assigned to the digital stereo input, for digital transfers. Output busses For digital transfers, you need a stereo bus assigned to the digital stereo output as well.

Preparations Before you set up busses, you should name the inputs and outputs on your audio hardware. The reason for this is compatibility — it makes it easier to transfer projects between different computers and setups. For example, if you move your project to another studio, the audio hardware may be of a different model.

But if both you and the other studio owner have given your in- puts and outputs names according to the setup rather than names based on the audio hardware model , Cubase AI will automatically find the correct inputs and outputs for your busses and you will be able to play and record with- out having to change the settings.

Use the Device Setup dialog to assign names to the in- puts and outputs of your audio hardware: 1. Open the Device Setup dialog from the Devices menu. Make sure that the correct driver for your audio hard- ware is selected on the VST Audio System page, so that the audio card is listed in the Devices list.

Select your audio card in the list. The available input and output ports on your audio hardware are listed on the right. Disabled ports will not show up in the VST Connections window when you are making bus settings. If you attempt to disable a port that is used by a bus, you will be asked whether this is really what you want — note that this will remove the port from the bus!

Click OK to close the Device Setup dialog. Pages 11—20 ». Shop Software Host Applications. Find your local Steinberg dealer. Audio Interfaces. Try Steinberg Software now for 30 days. Education Steinberg offers a range of products at special education pricing for facilities, educators and students.

Host Applications. Nuendo SyncStation. Expansions for VST Instruments. Support Downloads. Go to top. Configuring a DAW In case you consider setting up a new system or upgrading an existing one, we’ve gathered many useful tips and recommendations on how to configure your Digital Audio Workstation DAW.

 
 

Cubase 5 Instruction Manual PDF | PDF | Application Software | Digital Technology

 
 
Steinberg Media Technologies GmbH. Creativity First. Frankenstraße 18 b Hamburg. Tel: +49 (0)40 Fax: +49 (0)40 Mar 29,  · Cubase Studio · ISO Image · Mac OS X & Windows · GB. Use any common burning software to create an installation DVD from the ISO image. On Mac OS X and Windows 8, ISO images can be opened as virtual drives directly by double-click. To be able to do so on older Windows releases, you need for instance “WinCDEmu”. Download as PDF Here you can view all the pages of manual Steinberg Cubase 5 Operation Manual. The Steinberg manuals for Music Production System are available online for free.

Leave a Comment

Your email address will not be published. Required fields are marked *